Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual

Ethernet OAM Commands on the Cisco ASR 9000 Series Router
target mep-id id-number
statistics measure
aggregate none
aggregate bins number

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

ethernet sla on-demand operation type cfm-delay-measurement probe
Specifies the ID (from 1 to 8191)
of the target MEP that is known to
the local MEP for the probe.
(Optional) Specifies the type of
statistics to collect:
• one-way-delay-ds—One-way
delay statistics from
destination to source.
• one-way-delay-sd—One-way
delay statistics from source to
destination.
• one-way-jitter-ds—One-way
delay jitter from destination
to source.
• one-way-jitter-sd—One-way
delay jitter from source to
destination.
• round-trip-delay—Round-trip
delay statistics.
• round-trip-jitter—Round-trip
jitter statistics.
All statistics are collected by
default.
(Optional) Specifies that statistics
are not aggregated into bins, and
each statistic is stored individually.
This option can be
Caution
memory-intensive and
should be used with
care.
(Optional) Specifies the number of
bins (from 2 to 100) within each
bucket to store sample packets from
the probe. The default is to
aggregate into one bin.
Release 5.3.x
227