Service - Cisco ASR 9000 Series Command Reference Manual

service

service

To associate a service with a domain and enter CFM domain service configuration mode, use the service
command in CFM domain configuration mode. To remove a service from a domain, use the no form of this
command.
service service-name {bridge group bridge-domain-group bridge-domain bridge-domain-name| down-meps|
xconnect group xconnect-group-name {p2p xconnect-name | mp2mp xconnect-name ce-id ce-id-value
remote-ce-id remote-ce-id-value}} [id [icc-based icc-string umc-string] | | [string text]| [number number]|
[vlan-id id-number]| [vpn-id oui-vpnid]]
no service service-name {bridge group bridge-domain-group bridge-domain bridge-domain-name|
down-meps| xconnect group xconnect-group-name {p2p xconnect-name | mp2mp xconnect-name ce-id
ce-id-value remote-ce-id remote-ce-id-value}} [id [icc-based icc-string umc-string] | | [string text]| [number
number]| [vlan-id id-number]| [vpn-id oui-vpnid]]
Syntax Description
service-name
bridge
group bridge-domain-group
bridge-domain
bridge-domain-name
down-meps
xconnect
group xconnect-group-name
p2p xconnect-name
mp2mp xconnect-name
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
314
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
Administrative name for the service. Case sensitive ASCII string up to 80
characters.
Used in conjunction with one of the following service types:
• bridge
• down-meps
• xconnect
Specifies the use of a bridge domain. Used in conjunction with group and
bridge-domain.
Note When bridge is specified, all MEPs are up and MIPs are permitted.
Specifies the name of the bridge domain group.
Specifies the name of the bridge domain and enters the Ethernet CFM domain
service mode.
Specifies that all MEPs are down and no MIPs are permitted.
Specifies the use of a cross connect. Used in conjunction with group and
p2p or mp2mp.
Note When xconnect is specified, all MEPs are up and MIPs are
permitted.
Specifies the name of the cross connect group.
Specifies the name of the point-to-point cross connect and enters the Ethernet
CFM domain service mode.
Specifies the name of the multipoint-to-multipoint cross connect and enters
the Ethernet CFM domain service mode.