Show Ethernet Cfm Summary - Cisco ASR 9000 Series Command Reference Manual

show ethernet cfm summary

show ethernet cfm summary

To display summary information about CFM, use the show ethernet cfm summary command in the EXEC
mode.
show ethernet cfm summary locationnode-id
Syntax Description
location node-id
Command Default
An overall summary for all nodes is displayed.
Command Modes
EXEC (#)
Command History
Release
Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ethernet-services
Examples
This example shows how to display ethernet CFM summary:
RP/0/RSP0/CPU0:router# show ethernet cfm summary
CFM System Summary
==================
Domains
Services
Local MEPS
Operational
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
346
(Optional) Specifies the location for which CFM summary is required. If the location
is not specified, an overall summary for all nodes is displayed, followed by information
for each node. If the location is specified, only information from that node is displayed.
Down MEPs
Up MEPs
Offloaded
3.3ms
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
Modification
This command was introduced.
Operation
read
4
10000
10000
9997
9997
0
200
100