G709 Odu Report Disable - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Dense Wavelength Division Multiplexing Commands on the Cisco ASR 9000 Series Router

g709 odu report disable

To disable the logging of selected Optical Channel Data Unit (ODU) alarms to the console for a DWDM
controller, use the g709 odu report disable command in DWDM configuration mode. To return to the default
state, use the no form of this command.
g709 odu report {ais| bdi| lck| oci| ptim| tim} disable
no g709 odu report {ais| bdi| lck| oci| ptim| tim} disable
Syntax Description
ais
bdi
lck
oci
ptim
tim
Command Default
Reporting is enabled for all keywords.
Command Modes
DWDM configuration
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
dwdm
Alarm indication signal reporting status.
Backward defect indication reporting status.
Upstream connection locked reporting status.
Open connection indication error reporting status.
Payload type identifier mismatch reporting status.
Set Trace Identifier Mismatch reporting status.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
Operations
read, write
g709 odu report disable
Release 5.3.x
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents