Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual

Link Bundling Commands on the Cisco ASR 9000 Series Router
Field
Maximize threshold:
IPv4 BFD:

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Description
Threshold value below which mLACP switchovers
are triggered to allow the bundle to reach the
configured maximum number of active links or
bandwidth (using the mlacp switchover
maximizecommand), with the following possible
values:
• x links—Number of active links used as the
maximum threshold target to be maintained as
a trigger for an mLACP switchover on a bundle.
• y kbps—Bandwidth in kilobits per second used
as the target threshold to be maintained as a
trigger for an mLACP switchover on a bundle.
• Not configured—The mlacp switchover
maximizecommand is not configured. mLACP
switchovers are based on the minimum active
links or bandwidth for the bundle.
Displays whether or not IPv4-based bidirectional
forwarding (BFD) is operating on the bundle
interface, with the following possible values:
• Operational—All required configuration has
been committed for IPv4 BFD, and it is in use
on the bundle.
• Not operational—IPv4 BFD is not working
because some mandatory configuration is
missing on the bundle or on the active members
of the bundle.
• Not configured—None of the mandatory
configuration for IPv4 BFD has been committed
on the bundle, and the BFD sub-fields are not
displayed.
show bundle
Release 5.3.x
627