Show Iphc Profile - Cisco ASR 9000 Series Command Reference Manual

show iphc profile

show iphc profile
To display the configuration information of an IP header compression (IPHC) profile, use the show iphc
profile command in EXEC mode.
show iphc profile {profile-name| all} [detail]
Syntax Description
profile-name
all
detail
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ip-services
Examples The following examples show how to display information about an IPHC profile:
RP/0/RSP0/CPU0:router# show iphc profile ietf-test1
Tue Aug 10 06:53:19.711 PDT
IPHC Profile: ietf-test1
Type: IETF
Compressing : TCP
Context
Refresh
Feedback
Max_Header
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
818
Text name of the IPHC profile for which to display information.
Displays information for all profiles on the router.
(Optional) Displays the interfaces to which the profile is attached.
NON-TCP (RTP)
: TCP fixed at 1 NON-TCP fixed at 10
: NON-TCP every 60 seconds or 100 packets
: ON
: 40
Serial Interface Commands on the Cisco ASR 9000 Series Router
Modification
This command was introduced.
Operations
read