Show Controllers Egressq Queue - Cisco ASR 9000 Series Command Reference Manual

ASIC Driver Commands

show controllers egressq queue

To display information about a specific egress queue, or a range of egress queues, use the show controllers
egressq queue command in EXEC mode.
show controllers egressq queue {queue1 [queue2]| from-group {group-id| all}| from-interface {type
instance| all}| from-port {port-id| all}| limits {max| min}| all} location node-id
Syntax Description
queue1
queue2
from-group group-id
from-group all
from-interface type
instance
from-interface all
from-port port-id
from-port all
limits max
limits min
all
location node-id
Command Default
No default behavior or values
Identifies the first port whose egress queue information you want to display.
Replace the queue1 argument with a queue identifier. Range is from 1 through
8191.
(Optional) Identifies the last port whose egress queue information you want
to display. Replace the queue2 argument with a queue identifier. Range is
from 1 through 8191.
Displays egress queue information for a specific port group. Replace the
group-id argument with the number that identifies the port group whose
information is to be displayed. Range is from 1 through 2047.
Displays egress queue information for all port groups on the specified location.
Displays egress queue information for a specific interface. Replace the type
instance argument with a physical interface ID or a virtual interface ID.
Note
Displays egress queue information for all interfaces on the specified location.
Displays egress queue information for a specific port. Replace the port-id
argument with a port ID. Range is from 0 to 1023.
Displays egress queue information for all ports on the specified location.
Displays the maximum limits table.
Displays the minimum limits table.
Displays detailed information about all egress queues on the specified location.
Identifies the location of the node whose egress queue information you want
to display. The node-id argument is expressed in the rack/slot/module notation.
Cisco ASR 9000 Series Aggregation Services Router Advanced System Command Reference, Release 4.0
Use the show interfaces command to see a list of all possible
interfaces currently configured on the router.
show controllers egressq queue
3