Show Iphc Trace All - Cisco ASR 9000 Series Command Reference Manual

Serial Interface Commands on the Cisco ASR 9000 Series Router

show iphc trace all

To display trace results for all IP header compression (IPHC) configurations on the router, use the show iphc
trace all command in EXEC mode.
show iphc trace all [unique| wrapping] [hexdump] [last number-of-entries] [reverse] [stats] [tailf] [verbose]
[file file-name original location node-id| location {node-id| all| mgmt-nodes}]
Syntax Description
unique
wrapping
hexdump
last number_of_entries
reverse
stats
tailf
verbose
file file_name
original
location node_id
all
mgmt-nodes
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 4.0.0
(Optional) Displays trace information for unique entries with counts.
Optional) Displays wrapping entries.
(Optional) Displays trace information in hexadecimal format.
(Optional) Displays trace information for the last specified number of entries.
The range is from 1 to 4294967295.
(Optional) Displays trace information in reverse order (latest traces first).
(Optional) Displays statistics information for the trace.
(Optional) Displays new traces as they are added.
(Optional) Displays internal debugging information.
(Optional) Displays trace information for the specified file.
(Optional) Specifies the original location of file.
(Optional) Displays trace information for the specified card location.
(Optional) Displays trace information for all nodes.
(Optional) Displays trace information for all management nodes.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
show iphc trace all
Release 5.3.x
821