1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Card
  5. ASR 9000 Series
  6. Installation manual

Cisco ASR 9000 Series Installation Manual

Aggregation services router ethernet line card
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual, Installation Manual
Cisco ASR 9000 Series
Aggregation Services Router
Ethernet Line Card Installation Guide
May 2013
Cisco Systems, Inc.
www.cisco.com
Cisco has more than 200 offices worldwide.
Addresses, phone numbers, and fax numbers
are listed on the Cisco website at
www.cisco.com/go/offices.
Text Part Number: OL-17500-08

Advertisement

Table of Contents
loading

Related Manuals for Cisco ASR 9000 Series

Summary of Contents for Cisco ASR 9000 Series

  • Page 1 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide May 2013 Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco website at www.cisco.com/go/offices. Text Part Number: OL-17500-08...
  • Page 2 OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.

  • Page 3: Table Of Contents

    1-Port 40 Gigabit Ethernet Modular Port Adapter 1-39 2-Port 10-Gigabit Ethernet Modular Port Adapter 1-41 Preparing for Installation 1-43 Safety Guidelines 1-43 Preventing Electrostatic Discharge 1-44 Required Tools and Equipment 1-44 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...
  • Page 4 Cisco 40-Gigabit QSFP+ Transceiver Modules Installation 1-88 Overview 1-88 Required Tools 1-90 Installing the 40-Gigabit QSFP+ Transceiver Module 1-90 Attaching the Optical Network Cable 1-92 Removing the 40-Gigabit QSFP+ Transceiver Module 1-93 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...
  • Page 5 Basic Line Card Configuration Verifying the Transceiver Modules Advanced Line Card Troubleshooting Regulatory, Compliance, and Safety Information Laser Safety Technical Specifications A P P E N D I X Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...
  • Page 6 Contents Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...
  • Page 7 Installing a Bale Clasp SFP Module into a Port 1-70 Figure 1-29 Removing a Bale Clasp SFP or SFP+ Module 1-71 Figure 1-30 Mylar Tab SFP or SFP+ Module 1-72 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...
  • Page 8 SFP Module and Fiber-Optic Cable 1-100 Figure 1-60 Simplex LC Cable Connector 1-101 Figure 1-61 Duplex LC Cable Connector 1-102 Figure 1-62 RJ-45 Cable Connector 1-105 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide viii OL-17500-08...
  • Page 9 Supported 10-Gigabit Ethernet XFP Modules, 40 & 100-Gigabit Ethernet CFP Modules Table A-7 Supported DWDM XFP Transceivers Table A-8 Line Card Power Consumption Specifications Table A-9 Ethernet Line Card Physical Dimensions Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...
  • Page 10 Tables Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...
  • Page 11 Information added about the new 24-port 10-GE fixed line card, the 2-port 100-GE fixed line card, and the modular line card supporting the 20-port 1-GE Modular Port Adapter (MPA), the 4-port 10-GE Modular Port Adapter (MPA). Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...

  • Page 12: Document Organization

    March 2009 Initial release of this document. Audience The Cisco ASR 9000 Series Aggregation Services Router Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide is written for hardware installers and system administrators of Cisco routers. This publication assumes that the user has a substantial background in installing and configuring router and switch-based hardware.

  • Page 13: Obtaining Documentation And Submitting A Service Request

    Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html...
  • Page 14 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide -xiv OL-17500-08...

  • Page 15: Cisco Asr 9000 Series Router

    C H A P T E R Installing Line Cards in the Cisco ASR 9000 Series Router This guide contains instructions for installing Ethernet line cards in the Cisco ASR 9000 Series Aggregation Services Router. Contents This installation and configuration guide includes the following sections: •...

  • Page 16: Product Numbers And Supported Platforms

    Pre-Installation Information Product Numbers and Supported Platforms Table 1-1 lists the Cisco Ethernet line card product numbers to which this publication applies, and the supported router platforms for each line card. Table 1-1 Product Numbers for Line Cards and Supported Platforms...
  • Page 17 Cisco ASR 9010 Router, Cisco ASR 9006 Router 8-port 10GE Modular Port Adapter (MPA), Requires SFP+ Modules A9K-MPA-8X10GE Cisco ASR 9922 Router, Cisco ASR 9010 Router, Cisco ASR 9006 Router Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...

  • Page 18: Router Hardware Installation

    5. QSFP+ = 40-Gigabit Ethernet Quad Small Form-factor Pluggable plus transceiver module Router Hardware Installation For hardware installation and configuration information for the Cisco ASR 9000 Series Router, see the Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide. The guide includes information on how to install, maintain, and replace router subsystems, such as cooling fans, power supplies, chassis backplanes, and so on.
  • Page 19 Optimized Requires SFP+ Modules 36-Port 10-Gigabit Ethernet Line Card, Service Edge A9K-36X10GE-SE 4.2.2 Optimized Requires SFP+ Modules 1-Port 100GE DX Line Card, Packet Transport Optimized A9K-1X100GE-TR 4.2.2 Requires CFP Modules Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...

  • Page 20: Related Documentation

    Cisco IOS XR release. If the command displays indicate that the Cisco IOS XR software is a version earlier than you need, check the contents of flash memory to determine if the required images are available on your system.

  • Page 21: Ethernet Line Card Comparison

    8-Port 10GE Line Rate Card, Requires XFPs A9K-8T-B 8-Port 10GE Extended Line Rate Card, Requires A9K-8T-E XFPs 8-port 10GE 80G Low Queue Line Rate Card, A9K-8T-L Requires XFPs Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...
  • Page 22 160 Gigabyte Modular Line Card, Packet Transport A9K-MOD160-TR Optimized 160 Gigabyte Modular Line Card, Service Edge A9K-MOD160-SE Optimized 160 Gigabyte Modular Line Card, Packet Transport A9K-MOD160G-TR Optimized Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...

  • Page 23: Line Card Status Leds

    Use only small form-factor pluggable modules (SFP, SFP+, or XFP modules) supplied by Caution Cisco Systems, Inc. in the Cisco ASR 9000 Series line cards. Each module contains an internal serial number that is security programmed by the module manufacturer with information that provides a way for the Cisco IOS XR software to identify and validate the module as qualified to operate with Ethernet line cards.

  • Page 24: Figure 1-1 40-Port Gigabit Ethernet Line Card

    Port 0 SFP cage Port 39 SFP cage Port Status LED (one per port) Port 1 SFP cage Port 38 SFP cage Captive installation screw (one of two) Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-10 OL-17500-08...

  • Page 25: 8-Port 10-Gigabit Ethernet 2:1 Oversubscribed Line Card

    The Link LED indicates the status of the associated XFP port, as described in Table 2-1. Figure 1-2 shows the front panel and connectors of the 8-Port 10-Gigabit Ethernet line card. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-11 OL-17500-08...

  • Page 26: Figure 1-2 8-Port 10-Gigabit Ethernet 2:1 Oversubscribed Line Card

    Captive installation screw (one of two) Supported XFP Modules Table A-6 for a list of all XFPs supported on the 8-Port 10-Gigabit Ethernet 2:1 oversubscribed line card and their operating parameters. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-12 OL-17500-08...

  • Page 27: 4-Port 10-Gigabit Ethernet Line Card

    The Link LED indicates the status of the associated XFP port, as described in Table 2-1. Figure 1-3 shows the front panel and connectors of the 4-Port 10-Gigabit Ethernet line card. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-13 OL-17500-08...

  • Page 28: Figure 1-3 4-Port 10-Gigabit Ethernet Line Card

    4-Port 10-Gigabit Ethernet line card. For more information, see the “Supported XFP Modules” section on page 1-12 and the “Cabling Description” section on page 1-99. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-14 OL-17500-08...

  • Page 29: 8-Port 10-Gigabit Ethernet 80 Gbps Line Rate Card

    The Link LED indicates the status of the associated XFP port, as described in Table 2-1. Figure 1-4 shows the front panel and connectors of the 8-Port 10-Gigabit Ethernet 80 Gbps line rate card. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-15 OL-17500-08...
  • Page 30 XFPs supported on the 8-Port 10-Gigabit Ethernet 80 Gbps line rate card and their operating parameters. For more information, see the “Cabling Description” section on page 1-99. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-16 OL-17500-08...

  • Page 31: 2-Port 10-Gigabit + 20-Port Ge Combination Ethernet Line Card

    LED visible on the front panel. The Link LED indicates the status of the associated XFP or SFP port, as described in Table 2-1. Figure 1-5 shows the front panel and connectors of the 2-Port 10-GE + 20-Port GE combination line card. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-17 OL-17500-08...

  • Page 32: Figure 1-5 2-Port 10-Gigabit + 20-Port Ge Combination Line Card

    10 Captive installation screw (one of two) The interface numbering starts with zero for the GE and 10GE ports, so this line card has ports identified Note as Te0/x/0/0 and a Gig0/x/0/0. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-18 OL-17500-08...

  • Page 33: 16-Port 10-Gigabit Ethernet Oversubscribed Line Card

    The Link LED indicates the status of the associated SFP+ port, as described in Table 2-1. Figure 1-6 shows the front panel and connectors of the 16-Port 10-Gigabit Ethernet line card. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-19 OL-17500-08...
  • Page 34 Supported SFP+ Modules Table A-3 for a list of all SFP+ transceiver modules supported on the 16-Port 10-Gigabit Ethernet oversubscribed line card and their operating parameters. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-20 OL-17500-08...

  • Page 35: 24-Port 10-Gigabit Ethernet Line Card

    The Link LED indicates the status of the associated SFP+ port, as described in Table 2-1. Figure 1-7 shows the front panel and connectors of the 24-Port 10-Gigabit Ethernet line card. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-21 OL-17500-08...

  • Page 36: Figure 1-7 24-Port 10-Gigabit Ethernet Line Card

    Port 11 SFP+ cage Supported SFP+ Modules Table A-3 for a list of all SFP+ transceiver modules supported on the 24-Port 10-Gigabit Ethernet line card and their operating parameters. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-22 OL-17500-08...

  • Page 37: 36-Port 10-Gigabit Ethernet (36X10Ge) Line Card

    36-Port 10-Gigabit Ethernet (36x10GE) Line Card The 36-Port 10-Gigabit Ethernet (36x10GE) has thirty-six10-Gigabit SFP+ (10-Gigabit Ethernet SFP) module ports. Figure 1-8 shows the front panel connectors and indicators. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-23 OL-17500-08...

  • Page 38: Figure 1-8 36-Port 10-Gigabit Ethernet (36X10Ge) Line Card Front Panel

    Captive installation screw (one of two) Port 24 SFP+ cage Port 0 SFP+ cage Port 35 SFP+ cage Port 11 SFP+ cage Line Card Status LED Port 12 SFP+ cage Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-24 OL-17500-08...

  • Page 39: 1-Port 100-Gigabit Ethernet (1X100Ge) Line Card

    Transport Optimized) version. Both versions are functionally equivalent, but vary in configuration scale and buffer capacity. The CFP cage has an adjacent Link LED visible on the front panel. Figure 1-9 shows the front panel and connector. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-25 OL-17500-08...

  • Page 40: Figure 1-9 1-Port 100-Gigabit Ethernet (1X100Ge) Line Card Front Panel

    Figure 1-9 1-Port 100-Gigabit Ethernet (1x100GE) Line Card Front Panel Ejector lever (one of two) 100-GE CFP Captive installation screw (one of two) Line Card Status LED Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-26 OL-17500-08...

  • Page 41: 2-Port 100-Gigabit Ethernet Line Card

    Link LED indicates the status of the associated CFP port, as described in Table 2-1. Figure 1-10 shows the front panel and connectors of the 2-Port 100-GE line card. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-27 OL-17500-08...

  • Page 42: Figure 1-10 2-Port 100-Gigabit Ethernet Line Card

    100-GE ports on the 2-port 100-GE line card. For more information, see the “Cabling Description” section on page 1-99 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-28 OL-17500-08...

  • Page 43: Pluggable Interfaces

    Installing Line Cards in the Cisco ASR 9000 Series Router Modular Line Cards Pluggable Interfaces The Cisco ASR 9000 Series 1-Port 100 Gigabit Ethernet line card and Cisco ASR 9000 Series 2-Port 100 Gigabit Ethernet line card support the CFP pluggable interfaces listed in Table 1-4.

  • Page 44: Preparing For Installation

    20-Port Gigabit Ethernet Modular Port Adapter. For information on LEDs, see Modular Port Adapter LEDs, page 2-2. Figure 1-12 20-Port Gigabit Ethernet Modular Port Adapter LASER CLASS A/L (Active/Link) LED STATUS LED Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-30 OL-17500-08...

  • Page 45: 2-Port 10-Gigabit Ethernet Modular Port Adapter

    (Active/Link) LED visible on the front panel. The A/L (Active/link) LED indicates the status of the associated XFP port, as described in Table 1-6. Refer to Figure 1-13 below for an example of the 2-Port 10-Gigabit Ethernet modular port adapter. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-31 OL-17500-08...
  • Page 46 The 2-Port 10-Gigabit Ethernet modular port adapter has two types of LEDs: an A/L LED for each individual port and a STATUS LED for the modular port adapter, as shown in Figure 1-13. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-32 OL-17500-08...

  • Page 47: 4-Port 10-Gigabit Ethernet Modular Port Adapter

    LED visible on the front panel. The A/L LED indicates the status of the associated XFP port, as described in Table 1-7. Refer to Figure 1-14 below for an example of the 4-Port 10-Gigabit Ethernet modular port adapter. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-33 OL-17500-08...
  • Page 48 The 4-Port 10-Gigabit Ethernet modular port adapter has two types of LEDs: an A/L (Active/Link) LED for each individual port and a STATUS LED for the modular port adapter, as shown in Figure 1-14. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-34 OL-17500-08...

  • Page 49: 8-Port 10-Gigabit Ethernet Modular Port Adapter

    (Active/Link) LED visible on the front panel. The A/L (Active/Link) LED indicates the status of the associated SFP+ port, as described in Table 1-8. Refer to Figure 1-15 below for an example of the 8-Port 10-Gigabit Ethernet modular port adapter. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-35 OL-17500-08...
  • Page 50 The 8-Port 10-Gigabit Ethernet modular port adapter has two types of LEDs: an A/L (Active/Link) LED for each individual port and a STATUS LED for the modular port adapter, as shown in Figure 1-15. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-36 OL-17500-08...

  • Page 51: 2-Port 40 Gigabit Ethernet Modular Port Adapter

    (Active/Link) LED visible on the front panel. The A/L LED indicates the status of the associated QSFP port, as described in Table 1-9. Refer to Figure 1-16 below for an example of the 2-Port 40 Gigabit Ethernet modular port adapter. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-37 OL-17500-08...
  • Page 52 The 2-Port 40 Gigabit Ethernet modular port adapter has two types of LEDs: an A/L LED for each individual port and a STATUS LED for the modular port adapter, as shown in Figure 1-15. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-38 OL-17500-08...

  • Page 53: 1-Port 40 Gigabit Ethernet Modular Port Adapter

    (Active/Link) LED visible on the front panel. The A/L LED indicates the status of the associated QSFP port, as described in Table 1-10. Refer to Figure 1-17 below for an example of the 1-Port 40 Gigabit Ethernet modular port adapter. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-39 OL-17500-08...
  • Page 54 The 1-Port 40 Gigabit Ethernet modular port adapter has two types of LEDs: an A/L LED for each individual port and a STATUS LED for the modular port adapter, as shown in Figure 1-15. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-40 OL-17500-08...

  • Page 55: 2-Port 10-Gigabit Ethernet Modular Port Adapter

    (Active/Link) LED visible on the front panel. The A/L (Active/Link) LED indicates the status of the associated XFP port, as described in Table 1-8. Refer to Figure 1-15 below for an example of the 2-Port 10-Gigabit Ethernet modular port adapter. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-41 OL-17500-08...
  • Page 56 The 2-Port 10-Gigabit Ethernet modular port adapter has two types of LEDs: an A/L (Active/Link) LED for each individual port and a STATUS LED for the modular port adapter, as shown in Figure 1-15. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-42 OL-17500-08...

  • Page 57: Preparing For Installation

    • Do not wear loose clothing, jewelry, or other items that could get caught in the router while working with line cards. Cisco equipment operates safely when it is used in accordance with its specifications and product • usage instructions.

  • Page 58: Preventing Electrostatic Discharge

    Electromagnetic interference (EMI) shielding is an integral component of the line card and the modular port adapter. Cisco Systems, Inc. recommends using an ESD-preventive strap whenever you are handling network equipment or one of its components.

  • Page 59: Removing And Installing A Line Card

    200, a major alarm is generated against that slot. Fan tray insertion counts are not checked against a threshold. See the Release Notes for Cisco ASR 9000 Series Aggregation Services Routers for Cisco IOS XR Software Release 3.9.1 for information about CLI commands for obtaining and resetting card insertion data.

  • Page 60: Removing A Line Card

    Figure 1-19 Figure 1-20 as a reference and follow these steps: Attach an ESD-preventive wrist or ankle strap and follow its instructions for use. Step 1 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-46 OL-17500-08...
  • Page 61 Line Card Removal and Installation for the Cisco ASR 9010 Router Loosen the captive screws Pivot the ejector levers to Slide the card out of the unseat the card from the chassis backplane connector Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-47 OL-17500-08...

  • Page 62: Figure 1-20 Line Card Removal And Installation For The Cisco Asr 9006 Router

    Place the removed line card on an antistatic mat, or immediately place it in an antistatic bag if you plan Step 8 to return it to the factory. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-48 OL-17500-08...

  • Page 63: Installing A Line Card

    Caution To prevent ESD damage, handle line cards only by the metal card carrier. Do not touch any of the electrical components or circuitry. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-49 OL-17500-08...
  • Page 64 Cables” section on page 1-102. For information on verifying and troubleshooting the hardware installation, see the “Verifying and Troubleshooting Line Card Installation” section on page 2-1. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-50 OL-17500-08...

  • Page 65: Preparing To Install Modular Line Cards (Mlcs) Or Modular Port Adapters (Mpas)

    Do not wear loose clothing, jewelry, or other items that could get caught in the router while working • with line cards. Cisco equipment operates safely when it is used in accordance with its specifications and product • usage instructions.

  • Page 66: Figure 1-21 Laser Warning Labels For Single-Mode Port

    Because invisible laser radiation may be emitted form the aperture of the port when no fiber cable is Warning connected, avoid exposure to radiation and do not stare into open apertures. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-52 OL-17500-08...

  • Page 67: Preventing Electrostatic Discharge

    Electrostatic discharge (ESD) damage, which can occur when electronic cards or components are improperly handled, results in complete or intermittent failures. Electromagnetic interference (EMI) shielding is an integral component of the line card. Cisco recommends using an ESD-preventive strap whenever you are handling network equipment or one of its components.

  • Page 68: Handling Modular Line Cards (Mlcs)

    The following sections describe the procedures for removing and installing modular line cards (MLCs): Guidelines for Modular Line Card (MLC) Removal and Installation • Removing a Line Card • • Installing a Modular Line Card (MLC) Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-54 OL-17500-08...
  • Page 69 Some of the procedures in the following sections use illustrations of a 10-slot Note Cisco ASR 9000 Series Router to support the descriptions of removing and installing modular line cards (MLCs). Although the card cages of Cisco ASR 9000 Aggregation Services Routers differ, the designated use of slots and the process of installing and removing a modular line card (MLC) are basically the same.
  • Page 70 Use a screwdriver to loosen the captive screw at each end of the modular line card (MLC) faceplate. (See Callout 1 on Figure 1-24). Figure 1-24 Modular Line Card (MLC) Removal and Installation SP A SP A BA Y BA Y Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-56 OL-17500-08...

  • Page 71: Installing A Modular Line Card (Mlc)

    Note Refer to Figure 2-6 Cisco ASR 9010 Router Components and Slot Numbering and Figure 2-7 Cisco ASR 9006 Router Components and Slot Numbering in the Unpacking and Installing the Chassis chapter of the Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide for information on line card slot types in order to determine an appropriate slot in which to install the modular line card (MLC).

  • Page 72: Figure 1-25 Ejector Levers And Captive Screws

    Simultaneously pivot both ejector levers toward each other until they are perpendicular to the modular Step 5 line card (MLC) faceplate. This action firmly seats the card in the backplane. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-58 OL-17500-08...

  • Page 73: Installing And Removing Modular Port Adapters

    If you plan to install a modular port adapter (MPA) in a bay that is not in use, you must first remove the blank. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-59...

  • Page 74: Online Insertion And Removal

    3 Grounding Strap Online Insertion and Removal Cisco ASR 9000 Series Router modular line cards (MLCs) and modular port adapters (MPAs) support online insertion and removal (OIR). Modular port adapters (MPAs) can be inserted or removed independently from the modular line card (MLC). OIR of a modular line card (MLC) with installed modular port adapters (MPAs) is also supported.

  • Page 75: Modular Port Adapter (Mpa) Installation And Removal

    Hard OIR is the physical online insertion and removal of Modular port adapters (MPAs) without software commands. There are three types of hard OIR supported: If the bay is empty when the Cisco ASR 9000 Series Router modular line card (MLC) boots you can do the following: Insert a 20 GE MPA –...

  • Page 76: Optical Device Installation And Removal

    (C/A and A/L) may be green (on), depending on your connections and configuration. The console screen also displays a message as the system discovers each interface during its reinitialization. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-62...
  • Page 77 Step 2 associated interfaces are configurable. Refer to Cisco ASR 9000 Series Router Getting Started Guide and Cisco ASR 9000 Series Router Interface and Hardware Component Configuration Guide for configuration instructions. If a modular line card (MLC) or modular port adapter (MPA) is replaced with a module of the same •...
  • Page 78 If a modular port adapter (MPA) does not meet the minimum version required, the FPD may need Note to be updated. Refer to Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide for instructions. If the update fails, the failing module is powered down and an error message displays on the system console.
  • Page 79 Observe the console display messages and verify that the system discovers the modular line card (MLC), Step 1 while the system reinitializes each interface, as follows: Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-65 OL-17500-08...
  • Page 80 If the modular port adapter (MPA) is not supported or has an old hardware revision, the show diag command indicates that the modular line card (MLC) is deactivated. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-66 OL-17500-08...
  • Page 81 If the modular port adapter (MPA) is new and is not a replacement, configure the new modular port Step 5 adapter (MPA) using the instructions in Cisco IOS XR Getting Started Guide for the Cisco ASR 9000 Series Router and Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Configuration Guide.

  • Page 82: Installing And Removing Sfp Modules

    Installing Line Cards in the Cisco ASR 9000 Series Router Installing and Removing SFP Modules verify the status of the modular port adapter (MPA) ports. Refer to Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide and Cisco ASR 9000 Series Aggregation Services Router...

  • Page 83: Bale Clasp Sfp Or Sfp+ Module

    Close the bale clasp before inserting the SFP module. Step 2 Line up the SFP module with the port and slide it into the port (see Figure 1-28). Step 3 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-69 OL-17500-08...

  • Page 84: Figure 1-28 Installing A Bale Clasp Sfp Module Into A Port

    Step 4 Grasp the SFP module between your thumb and index finger and carefully remove it from the port, as shown in Figure 1-29. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-70 OL-17500-08...

  • Page 85: Mylar Tab Sfp Or Sfp+ Module

    Mylar Tab SFP or SFP+ Module The mylar tab SFP or SFP+ module has a tab to pull to remove the module from a port (see Figure 1-30). Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-71 OL-17500-08...

  • Page 86: Figure 1-30 Mylar Tab Sfp Or Sfp+ Module

    To remove this type of SFP or SFP+ module, follow these steps: Attach an ESD-preventive wrist or ankle strap and follow its instructions for use. Step 1 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-72 OL-17500-08...

  • Page 87: Actuator Button Sfp Or Sfp+ Module

    The actuator button SFP or SFP+ module includes a button that you push in order to remove the SFP module from a port (see Figure 1-33). Figure 1-33 Actuator Button SFP or SFP+ Module Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-73 OL-17500-08...

  • Page 88: Figure 1-34 Installing An Actuator Button Sfp Or Sfp+ Module

    Gently press the actuator button on the front of the SFP module until it clicks and the latch mechanism activates, releasing the SFP module from the port (see Figure 1-35). Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-74 OL-17500-08...

  • Page 89: Figure 1-35 Removing An Actuator Button Sfp Or Sfp+ Module From A Port

    Protect your line card by inserting clean SFP module cage covers into the optical module cage when Step 6 there is no SFP module installed. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-75 OL-17500-08...

  • Page 90: Slide Tab Sfp Or Sfp+ Module

    Verify that the SFP modules are completely seated and secured in their assigned receptacles on the line card by firmly pushing on each SFP module. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-76...

  • Page 91: Figure 1-38 Disengaging The Slide Tab

    You must disengage the SFP module by pushing on the slide tab before you can pull out the module. If Caution you pull on the SFP module without disengaging the tab, you can damage the module. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-77 OL-17500-08...

  • Page 92: Installing And Removing Xfp Modules

    Removing and inserting an XFP module can shorten its useful life, so you should not remove and insert XFP modules any more often than is absolutely necessary. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-78...

  • Page 93: Installing A 10-Gigabit Ethernet Xfp Transceiver Module

    Do not remove the optical bore dust plug until directed to do so later in the procedure. Note Step 2 Check the label on the XFP transceiver body to verify that you have the correct model for your network. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-79 OL-17500-08...

  • Page 94: Figure 1-41 Installing The 10-Gigabit Ethernet Xfp Transceiver Module

    Immediately reinstall the dust plug in the XFP transceiver optical bores. Do not remove the dust plug Step 8 until you are ready to attach the network interface cable. 10-Gigabit XFP transceivers are keyed to prevent incorrect insertion. Note Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-80 OL-17500-08...

  • Page 95: Removing A 10-Gigabit Ethernet Xfp Transceiver Module

    Immediately place the XFP transceiver in an antistatic bag. Step 4 Figure 1-42 Removing the 10-Gigabit Ethernet XFP Transceiver A/ L A/ L A/ L A/ L Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-81 OL-17500-08...

  • Page 96: Cabling A 10-Gigabit Ethernet Xfp Transceiver

    Cisco 40-Gigabit and 100-Gigabit Ethernet CFP Transceiver Modules Installation This section provides the installation, cabling, and removal instructions for the Cisco 40-Gigabit and 100-Gigabit C Form-factor Pluggable (CFP) transceiver modules. The modules are hot-swappable input/output (I/O) devices that connect the system’s module port electrical circuitry with either a copper or a fiber-optic network.

  • Page 97: Overview

    CFP-100G-LR4 Cisco 100GBASE-LR4 CFP transceiver module for SMF, 1310 nm window, SC connector CFP-100G-SR10 Cisco 100GBASE-SR10 CFP transceiver module for MMF, 1310 nm window, SC connector Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-83 OL-17500-08...

  • Page 98: Required Tools

    Check the label on the CFP transceiver body to verify that you have the correct model for your network. Step 2 Step 3 Remove the dust plug from the CFP transceiver module optical port and set it aside. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-84 OL-17500-08...

  • Page 99: Figure 1-45 Installing The Cfp Transceiver Module

    Press firmly on the front of the CFP transceiver with your thumb to fully seat it in the transceiver socket. Step 5 (See Figure 1-46.) Figure 1-46 Seating the CFP Transceiver Module in the Socket Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-85 OL-17500-08...

  • Page 100: Removing The Cfp Transceiver

    The CFP transceiver is a static-sensitive device. Always use an ESD wrist strap or similar individual Caution grounding device when handling the CFP transceivers or coming into contact with the modules. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-86 OL-17500-08...

  • Page 101: Figure 1-49 Removing A Cfp Transceiver Module

    1-49.) Immediately place the CFP Step 3 transceiver in antistatic protective packaging. Figure 1-49 Removing a CFP Transceiver Module Captive installation screws Optical bore dust plugs Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-87 OL-17500-08...

  • Page 102: Cisco 40-Gigabit Qsfp+ Transceiver Modules Installation

    SFP+ modules. Figure 1-50 40-Gigabit QSFP+ Transceiver Module (Optical) 40GBASE QSFP+ transceiver body Electrical connection to the module circuitry Bail-clasp latch Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-88 OL-17500-08...
  • Page 103 2000 100 m (328 ft) 50.0 4700 150 m (492 ft) QSFP-40G-LR4= 1271, G.652 10km 1291, 1311 1331 QSFP-40GE-LR4= 1271, G.652 10 km 1291, 1311 1331 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-89 OL-17500-08...

  • Page 104: Required Tools

    Attach an ESD wrist strap to yourself and a properly grounded point on the chassis or the rack. Step 1 Remove the QSFP+ transceiver module from its protective packaging. Step 2 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-90 OL-17500-08...

  • Page 105: Figure 1-51 Installing The 40-Gigabit Qsfp+ Transceiver Module

    Press firmly on the front of the QSFP+ transceiver with your thumb to fully seat the transceiver in the Step 7 module’s transceiver socket. (See Figure 1-52.) Caution If the latch is not fully engaged, you might accidently disconnect the QSFP+ transceiver module. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-91 OL-17500-08...

  • Page 106: Attaching The Optical Network Cable

    Grasp the MPO connector only by the housing to plug or unplug a fiber-optic cable. – 40-Gigabit QSFP+ transceiver modules are keyed to prevent incorrect insertion. Note Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-92 OL-17500-08...

  • Page 107: Removing The 40-Gigabit Qsfp+ Transceiver Module

    QSFP+ transceiver modules or coming into contact with modules. To remove a QSFP+ transceiver, follow these steps: For optical QSFP+ transceivers, disconnect the network interface cable from the QSFP+ transceiver Step 1 connector. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-93 OL-17500-08...

  • Page 108: Line Card Cable Management

    Cisco ASR 9000 Series Routers include a cable-management system that organizes the interface cables entering and exiting the router, keeping them out of the way and free of sharp bends.

  • Page 109: Cable Management Tray

    3 in slot 3 in a Cisco ASR 9010 Router. Router Cable Management Brackets The Cisco ASR 9006 Router provides for a cable management bracket on each side of the router chassis. Figure 1-56 shows a typical cable routing for the Cisco ASR 9006 Router.

  • Page 110: Line Card Cable Management Bracket

    J. 21 1 B IT S J. 21 1 Each line card has its own cable routing slot in the Cisco ASR 9006 Router cable management brackets. For example, the cables shown in Figure 1-56 are cables being routed to line card 0 in slot 3 and line card 2 in slot 5.

  • Page 111: Installing A Line Card Cable Management Bracket

    Installing a Line Card Cable Management Bracket To install a line card cable-management bracket, follow these steps: Attach an ESD-preventive wrist or ankle strap and follow its instructions for use. Step 1 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-97 OL-17500-08...

  • Page 112: Removing A Line Card Cable-Management Bracket

    Attach an ESD-preventive wrist or ankle strap and follow its instructions for use. Step 1 Step 2 Note the current interface cable connections to the ports on each line card. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-98 OL-17500-08...

  • Page 113: Cabling Description

    (TX) and laser receive (RX)—and an electrical interface (to the line card). The SFP+ modules used on the 16-Port 10-Gigabit Ethernet oversubscribed line card are enhanced SFP modules. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-99 OL-17500-08...

  • Page 114: Figure 1-59 Sfp Module And Fiber-Optic Cable

    If your environment requires the light to travel close to the typical maximum distance, you should use an optical time domain reflectometer (OTDR) to measure the power loss. Use only the SFP and SFP+ modules supplied by Cisco Systems, Inc. with your Ethernet line card. Each Caution...

  • Page 115: Fiber-Optic Interface Cables

    LC-type connectors to connect an Ethernet interface on the line card in your Cisco ASR 9000 Series Router to another Ethernet interface, router, or switch. Fiber optic cables are not available from Cisco Systems. They can be purchased from cable vendors. Note The following types of cables are used with line cards to connect your router to another router or switch: Single-mode—Generally yellow in color.

  • Page 116: Installing And Removing Fiber-Optic Interface Cables

    1-60) or one duplex LC connector (see Figure 1-61). Optical fiber cables are available from cable vendors. These cables are not available from Cisco. Note Because invisible laser radiation may be emitted from the aperture of the port when no cable is Warning connected, avoid exposure to laser radiation and do not stare into open apertures.
  • Page 117 Detach the line card cable management bracket and optical fiber cable bundle from the line card and Step 5 place it carefully out of the way. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-103 OL-17500-08...

  • Page 118: Cleaning Fiber-Optic Connectors

    For an Ethernet line card equipped with copper SFP transceivers, use an EIA/TIA–568-compliant cable with MDI wiring and RJ-45 connectors (see Figure 1-62) to connect your Cisco ASR 9000 Series Router to another router or switch. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-104 OL-17500-08...

  • Page 119: Removing And Installing Rj-45 10/100/1000Base-T Copper Cables

    Detach the line card cable management bracket and optical fiber cable bundle from the line card and Step 4 place it carefully out of the way. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-105 OL-17500-08...
  • Page 120 Chapter 1 Installing Line Cards in the Cisco ASR 9000 Series Router Cabling Description Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 1-106 OL-17500-08...

  • Page 121: Verifying And Troubleshooting The Line Card Installation

    During a typical line card boot process, the following events occur: The line card receives power and begins executing initialization software. The line card performs internal checks, and prepares to accept the Cisco IOS XR software from the RSP. The RSP loads the line card with its Cisco IOS XR software.

  • Page 122: Status Leds

    Green Line card has booted properly, and is ready to pass or is passing traffic. Steady Amber Line card boot process is underway. When the Cisco IOS XR software finishes loading, the LED turns green. Blinking Amber Software configuration error has occurred that prevents the line card from passing traffic.

  • Page 123: Troubleshooting The Installation

    If an error message displays on the console terminal during the line card initialization, see the Step 4 appropriate reference publication for error message definitions. If you experience other problems that you cannot solve, contact a Cisco service representative for assistance. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide...

  • Page 124: Configuring And Troubleshooting Line Card Interfaces

    Instance numbers are reserved for cards that have subslots. This parameter is currently always 0 (zero) for line cards in the Cisco ASR 9000 Series. The ports on the line card are numbered 0, 1, 2, and so on. For example, the rack/slot/instance/port address of the fourth port of a line card installed in line card slot 1 is 0/1/0/3.

  • Page 125: Using Configuration Commands

    The no shutdown command passes an enable command to the line card. It also causes the line card to configure itself based on the most recent configuration commands received by the line card. If you want to disable the Cisco Discovery Protocol (CDP), which is not required, use this command: Step 7...

  • Page 126: Verifying The Transceiver Modules

    NAME: "module mau 0/1/CPU0/3", DESCR: "1000BASE-SX SFP (DOM), MMF, 550/220m" PID: SFP-GE-S , VID: V01 , SN: FNS12210HMJ NAME: "module mau 0/1/CPU0/7", DESCR: "1000BASE-SX SFP (DOM), MMF, 550/220m" PID: SFP-GE-S , VID: V01 , SN: FNS12210HM4 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...
  • Page 127 PID: SFP-10G-LR , VID: V01 , SN: ECL1338022R NAME: "module 0/2/CPU0", DESCR: "16-Port 10GE DX Medium Queue Line Card, Requires SFPs" PID: A9K-16T/8-B , VID: V01, SN: FOC135180R9 Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...

  • Page 128: Advanced Line Card Troubleshooting

    Advanced Line Card Troubleshooting This section briefly describes advanced troubleshooting commands that can be used if a line card fails. This section assumes that you possess basic proficiency in the use of Cisco IOS XR software commands. Note By using the commands listed in this section, you should be able to determine the nature of the problems you are having with your line card.

  • Page 129: Regulatory, Compliance, And Safety Information

    Chapter 2 Verifying and Troubleshooting the Line Card Installation Regulatory, Compliance, and Safety Information For examples of how to use these commands and the resulting output, see the Cisco ASR 9000 Series Troubleshooting Guide. Note It is important to collect the show tech-support command data before doing a reload or power cycle.
  • Page 130 Chapter 2 Verifying and Troubleshooting the Line Card Installation Regulatory, Compliance, and Safety Information Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide 2-10 OL-17500-08...

  • Page 131: Appendix

    A P P E N D I X Technical Specifications This appendix lists the specifications for the Ethernet line cards for the Cisco ASR 9000 Series Aggregation Services Router. The specifications are presented in the following tables: Table A-1, Cisco ASR 9000 Series Environmental Specifications...

  • Page 132: Appendix A Technical Specification

    Ethernet line cards using GLC-GE-100FX SFP transceiver modules are installed in the router. This is due to the lower temperature specifications of the SFP module. Please contact a Cisco representative for more information. 2. Short term operating temperature specifications for the router will differ from those listed in this table when the 16-port 10-Gigabit Ethernet line card is installed in the router because of the lower temperature specifications of the SFP+ modules that are used in this line card.

  • Page 133: Table A-3 Supported Sfp+ Transceivers

    When using the SFP-10G-SR module, the maximum altitude is 5905 ft (1800 m). When using the SFP-10G-LR or SFP-10G-ER modules, the maximum altitude is sea level. Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...
  • Page 134 104°F (40°C). Restriction on the 24 -port 10-Gigabit Ethernet line card in the Cisco ASR 9010 chassis with (C-temp) ZR optics operating at 40C + 1800 Elevations: No ZR in slots 1 and 6...
  • Page 135 Cisco IOS XR software to identify and validate the SFP module to operate properly with Cisco Ethernet line cards. Unapproved SFP modules (those not purchased directly from Cisco Systems, Inc.) do not work on the Ethernet line card. To verify the version of the installed SFP module, see the “Verifying the Transceiver Modules”...

  • Page 136: Table A-6 Supported 10-Gigabit Ethernet Xfp Modules, 40 & 100-Gigabit Ethernet Cfp Modules

    Multirate 100 Gigabit Ethernet-SR10 850 nm 328.1 feet (100 m) 492.15 feet (150 m) Table A-7 lists the supported and describes their operating parameters. DWDM XFP transceivers Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...
  • Page 137 Cisco 10GBASE-DWDM XFP (100 GHz ITU grid) 1531.12 nm DWDM-XFP-30.33 Cisco 10GBASE-DWDM XFP (100 GHz ITU grid) 1530.33 nm DWDM-XFP-C Cisco 10GBASE-DWDM Tunable XFP (50-GHz ITU grid) 80 Variable Variable Channels Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...
  • Page 138 565 W at 77 F (25 ° ° 575 W at 104 F (40 ° ° 630 W at 131 F (55 24-Port 10-Gigabit Ethernet Line Card Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...

  • Page 139: Table A-9 Ethernet Line Card Physical Dimensions

    4-Port 10GE Low Queue Line A9K-4T-L 14 inches 1.72 inches 20.5 inches 18.5 +/- .5 pounds Card, requires XFPs 35.56 cm 4.37 cm 52.07 cm 8.39146 +/- .2268 kg Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide OL-17500-08...
  • Page 140 36-Port 10GE Line Card, A9K-36X10GE-TR 14 inches 1.72 inches 20.5 inches 19.07 pounds Packet Transport Optimized 35.56 cm 4.37 cm 52.07 cm 8.6500065 kg Requires SFP+ Modules Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide A-10 OL-17500-08...
  • Page 141 160 Gigabyte Modular Line A9K-MOD160-SE 14 inches 1.72 inches 20.5 inches 16.34 pounds Card, Service Edge 35.56 cm 4.37 cm 52.07 cm 7.4117 kg Optimized (without EPs) Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide A-11 OL-17500-08...
  • Page 142 Appendix A Technical Specifications Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide A-12 OL-17500-08...

Table of Contents