Cisco ASR 9000 Series Command Reference Manual page 911

SONET Controller Commands on the Cisco ASR 9000 Series Router
Examples The following example shows how to enable APS to revert to the protect or working channel after 5 minutes
have elapsed:
RP/0/RSP0/CPU0:router(config)# aps group 1
RP/0/RSP0/CPU0:router(config-aps)# revert 5
Related Commands
Command
aps group (global), on page 842
show aps, on page 893
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Description
Adds an automatic protection switching (APS) group and enter APS
group configuration mode.
Displays the operational status for all configured SONET APS
groups.
revert
Release 5.3.x
891