Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual

Ethernet OAM Commands on the Cisco ASR 9000 Series Router
Command History
Release
Release 4.3.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ethernet-services
Examples This example shows a minimum configuration, that specifies the local domain and source interface and target
MEP, using these defaults:
• Send a burst once for a packet count of 100 and interval of 100 milliseconds .
• The number of packets to be used for FLR calculation is 100.
• Measure the one way loss statistics in both the directions .
• Aggregate statistics into one bin.
• Schedule now.
• Display results on the console.
RP/0/RSP0/CPU0:routerethernet sla on-demand operation type cfm-synthetic-loss-measurement
probe
domain D1 source interface TenGigE 0/6/1/0 target mac-address 2.3.4
Related Commands
Command
clear ethernet sla statistics all, on page 179
clear ethernet sla statistics on-demand, on
page 181
show ethernet sla operations, on page 382
show ethernet sla statistics, on page 385
ethernet sla on-demand operation type cfm-synthetic-loss-measurement probe

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Modification
This command was introduced.
Operation
execute
Description
Deletes the contents of buckets containing SLA statistics
collected by all operations probes.
Deletes the contents of buckets containing SLA statistics
collected by on-demand probes.
Displays information about configured Ethernet SLA
operations.
Displays the contents of buckets containing Ethernet SLA
metrics collected by probes.
Release 5.3.x
243