SONET Controller Commands on the Cisco ASR 9000 Series Router
Examples
The following example shows how to specify AU 1.
RP/0/RSP0/CPU0:router(config)# controller sonet 0/1/0/0
RP/0/RSP0/CPU0:router(config-sonet)# au 1
RP/0/RSP0/CPU0:router(config-auPath)#
Related Commands
Command
tug3, on page 927
Description
Specifies the tributary unit group (TUG) number and enters the TUG3
controller configuration mode.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
au
Release 5.3.x
845