Ethernet Interface Commands on the Cisco ASR 9000 Series Router
lldp tlv-select disable
To disable transmission of the selected Type Length Value (TLV) in Link Layer Discovery Protocol (LLDP)
packets, use the lld tlv-select disable command in global configuration mode. To return to the default, use
the no form of this command.
lldp tlv-select tlv-name disable
no lldp tlv-select tlv-name disable
Syntax Description
tlv-name
Command Default
All TLVs are sent in LLDP packets.
Command Modes
Global configuration (config)
Command History
Release
Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Certain TLVs are classified as mandatory in LLDP packets, such as the Chassis ID, Port ID, and Time to Live
(TTL) TLVs. These TLVs must be present in every LLDP packet. You can use the lldp tlv-select disable
command to suppress transmission of certain other optional TLVs in LLDP packets.
Task ID
Task ID
ethernet-services
Name of the TLV to be suppressed from LLDP packets. The tlv-name can be one of the
following LLDP TLV types:
• management-address
• port-description
• system-capabilities
• system-description
• system-name
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
Operation
read, write
lldp tlv-select disable
Release 5.3.x
95