show ethernet cfm interfaces ais
show ethernet cfm interfaces ais
To display the information about interfaces that are currently transmitting Alarm Indication Signal (AIS), use
the show ethernet cfm interfaces ais command in EXEC mode.
show ethernet cfm interfaces [type interface-path-id] ais [location node-id]
Syntax Description
type
interface-path-id
location node-id
Command Default
If no parameters are specified, information for all AIS interfaces is displayed.
Command Modes
EXEC (#)
Command History
Release
Release 3.9.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The location keyword cannot be specified if an interface has been specified.
Note
Task ID
Task ID
ethernet-services
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
324
(Optional) Interface type. For more information, use the question mark (?) online
help function.
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
Note
configured on the router.
For more information about the syntax for the router, use the question mark (?)
online help function.
(Optional) Displays information about the node location specified as rack / slot /
module. Location cannot be specified if you configure an interface type.
Modification
This command was introduced.
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
Operations
read, write