Show Lacp Ethernet - Cisco SPS2024 Reference Manual

LACP Commands

show lacp ethernet

show lacp ethernet
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example assigns a long administrative LACP timeout to Ethernet
port e6.
Console(config)# interface ethernet e6
Console(config-if)# lacp timeout long
The show lacp ethernet Privileged EXEC mode command displays LACP
information for Ethernet ports.
Syntax
show lacp ethernet interface
Parameters
•
interface
— Valid Ethernet port.
•
parameters — Link aggregation parameter information.
•
statistics — Link aggregation statistics information.
•
protocol-state — Link aggregation protocol-state information.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
[parameters | statistics | protocol-state]
17
238