Frame Relay Commands on the Cisco ASR 9000 Series Router
Task ID
Task ID
fr
Examples
The following example shows how to configure the MFR acknowledge timeout value as 2 seconds. for the
serial interface 0/3/1/0:
RP/0/RSP0/CPU0:router(config)# interface serial 0/3/1/0
RP/0/RSP0/CPU0:router(config-if)# frame-relay multilink ack 2
Related Commands
Command
encapsulation frame-relay, on page 429
frame-relay multilink bid, on page 452
show frame-relay lmi-info, on page 465
shutdown (interface)
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Operations
read, write
Description
Enables Frame Relay encapsulation.
Assigns a BID name to a multilink Frame Relay
bundle.
Displays frame relay information for the LMI.
Disables an interface.
frame-relay multilink ack
Release 5.3.x
449