Show Iccp Group - Cisco ASR 9000 Series Command Reference Manual

Link Bundling Commands on the Cisco ASR 9000 Series Router

show iccp group

To display information for the ICCP parameters, use the show iccp command in EXEC mode.
show iccp group {group-id| location node-id}
Syntax Description
group-id
location
node-id
Command Default
None
Command Modes
EXEC
Command History
Release
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
mpls-ldp
Examples The following example shows the output of the show iccp group command:
RP/0/RSP0/CPU0:router#show iccp group
Redundancy Group 1
member ip:2.2.2.2 (router2), up (connected)
backbone interface Gi0/2/0/3: up
enabled applications: mLACP
isolation recovery delay timer: 180 s, not running
Redundancy Group 2
member ip:2.2.2.2 (router2), up (disconnected)
monitor: route-watch (up)
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
ICCP group ID.
Specifies the location.
Node ID. The node-id argument is entered in the rack/slot/module
notation.
Modification
This command was introduced.
Operations
read
show iccp group
Release 5.3.x
643