Frame Relay Commands on the Cisco ASR 9000 Series Router
Task ID
Task ID
fr
Examples
The following example shows how to configure the hello interval value as 10 seconds. for the serial interface
0/3/1/0:
RP/0/RSP0/CPU0:router(config)# interface serial 0/3/1/0
RP/0/RSP0/CPU0:router(config-if)# frame-relay multilink hello 10
Related Commands
Command
encapsulation frame-relay, on page 429
frame-relay multilink bid, on page 452
show frame-relay lmi-info, on page 465
shutdown (interface)
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Operations
read, write
Description
Enables Frame Relay encapsulation.
Assigns a BID name to a multilink Frame Relay
bundle.
Displays frame relay information for the LMI.
Disables an interface.
frame-relay multilink hello
Release 5.3.x
455