Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual

buckets size
Changing the size of the buckets for a given metric clears all stored data for that metric. All existing
Note
buckets are deleted and new buckets are created.
Task ID
Task ID
ethernet-services
Examples
This example shows how to configure the size of the buckets in which statistics are collected.
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# ethernet sla
RP/0/RSP0/CPU0:router(config-sla)# profile Prof1 type cfm-loopback
RP/0/RSP0/CPU0:router(config-sla-prof)# statistics measure round-trip-delay
RP/0/RSP0/CPU0:router(config-sla-prof-stat-cfg)# buckets size 100 per-probe
Related Commands
Command
buckets archive, on page 161
probe, on page 298
schedule (SLA), on page 307
send (SLA), on page 311

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x
164
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
Operations
read, write
Description
Configures the number of buckets to store in memory.
Enters SLA profile probe configuration mode.
Configures the number and timing of packets sent by a probe
in an operations profile.