Service Management Tasks; Modifying Service Parameters - Alcatel-Lucent 7705 Service Manual

Service Management Tasks

The service management tasks are similar for Apipe, Cpipe, Epipe, and Ipipe services. This
section discusses the following service management tasks:

Modifying Service Parameters

Use the
services.
To modify a VLL service:
PE router 1 (A:ALU-41):
Example:
7705 SAR OS Services Guide
• Modifying Service Parameters
• Disabling a Service
• Re-enabling a Service
• Deleting a Service
show service service-using
1. Access the specific account by specifying the service ID.
2. Enter the service parameter to modify and then enter the new information.
A:ALU-41>config>service# apipe 5
A:ALU-41>config>service>apipe# sap 1/1/1.1:0/32 create
A:ALU-41>config>service>apipe>sap# accounting-policy 2
A:ALU-41>config>service>apipe>sap# exit
A:ALU-41>config>service>apipe# spoke-sdp 1:4
A:ALU-41>config>service>apipe>spoke-sdp# egress
A:ALU-41>config>service>apipe>spoke-sdp>egress# vc-label
2048
A:ALU-41>config>service>apipe>spoke-sdp>egress# exit
A:ALU-41>config>service>apipe>spoke-sdp# ingress
A:ALU-41>config>service>apipe>spoke-sdp>ingress# vc-label
18431
A:ALU-41>config>service>apipe>spoke-sdp>ingress# exit
A:ALU-41>config>service>apipe>spoke-sdp# exit
A:ALU-41>config>service>apipe#
command to display a list of configured VLL
VLL Services
Page 221