Table 8-19: Recommended Alternate Frm Scheme - Epson S1D13505 Technical Manual

Epson Research and Development
Vancouver Design Center
Alternate FRM Register
REG[31h]
Alternate Alternate
FRM FRM
Bit 7 Bit 6
bits 7-0
Hardware Functional Specification
Issue Date: 01/02/02
Alternate Alternate
FRM FRM
Bit 5 Bit 4
Alternate Frame Rate Modulation Select
Register that controls the alternate FRM scheme. When all bits are set to zero, the default FRM is
selected. For single passive, or dual passive with the half frame buffer enabled, either the original or
the alternate FRM scheme may be used. The alternate FRM scheme may produce more visually
appealing output. The following table shows the recommended alternate FRM scheme values.

Table 8-19: Recommended Alternate FRM Scheme

Panel Mode
Single Passive
Dual Passive w/Half Frame Buffer Enabled
Dual Passive w/Half Frame Buffer Disabled
Alternate Alternate
FRM FRM
Bit 3 Bit 2
Register Value
0000 0000 or 1111 1111
0000 0000 or 1111 1010
1111 1111
Page 121
RW
Alternate Alternate
FRM FRM
Bit 1 Bit 0
S1D13505
X23A-A-001-14