Epson S1D13505 Technical Manual page 307

Epson Research and Development
Vancouver Design Center
13505VIRT
S1D13505 Supported Evaluation Platforms
Installation
13505VIRT Display Utility
Issue Date: 01/02/02
13505VIRT demonstrates the virtual display capability of the S1D13505. A virtual display is where
the image to be displayed is larger than the physical display device (CRT or LCD). 13505VIRT uses
panning and scrolling to allow the display device to show a "window" into the entire image.
The 13505VIRT display utility must be configured and/or compiled to work with your hardware
platform. The program 13505CFG.EXE can be used to configure 13505VIRT. Consult the
13505CFG users guide, document number X23A-B-001-xx, for more information on configuring
S1D13505 utilities.
This software is designed to work in both embedded and personal computer (PC) environments. For
the embedded environment, it is assumed that the system has a means of downloading software from
the PC to the target platform. Typically this is done by serial communications, where the PC uses a
terminal program to send control commands and information to the target processor. Alternatively,
the PC can program an EPROM, which is then placed in the target platform. Some target platforms
can also communicate with the PC via a parallel port connection, or an Ethernet connection.
13505VIRT has been tested with the following S1D13505 supported evaluation platforms:
• PC system with an Intel 80x86 processor.
• M68332BCC (Business Card Computer) board, revision B, with a Motorola MC68332
processor.
• M68EC000IDP (Integrated Development Platform) board, revision 3.0, with a Motorola
M68EC000 processor.
• SH3-LCEVB board, revision B, with an Hitachi SH-3 HD6417780 processor.
PC platform: copy the file 13505VIRT.EXE to a directory that is in the DOS path on your hard
drive.
Embedded platform: download the program 13505VIRT to the system.
Page 3
S1D13505
X23A-B-004-04