Epson S1D13505 Technical Manual page 330

Page 4
Usage
13505PWR Examples
S1D13505
X23A-B-007-03
PC platform: at the prompt, type
13505pwr [/software
[/0 | /1] [/?].
Embedded platform: execute 13505pwr and at the prompt, type the command line argument.
Where:
/software
/hardware
/lcd
/enable
/disable
/i
/0
/1
/?
Note
13505PWR will automatically finish execution and return to the prompt.
To enable software suspend mode, type the following:
13505PWR /software /enable
To disable software suspend mode, type the following:
13505PWR /software /disable
To enable hardware suspend mode, type the following:
13505PWR /hardware /enable
To disable hardware suspend mode, type the following:
13505PWR /hardware /disable
To enable the LCD, type the following:
13505PWR /lcd /enable
To disable the LCD, type the following:
13505PWR /lcd /disable
/hardware | /lcd] [/enable
selects software suspend
selects hardware suspend (PC only)
selects the LCD
activates software suspend, hardware suspend, or the LCD
deactivates software suspend, hardware suspend, or the LCD
initializes registers
GPIO1 triggers on falling edge (1->0)
GPIO1 triggers on rising edge (0->1)
displays this usage message
13505PWR Software Suspend Power Sequencing Utility
Epson Research and Development
Vancouver Design Center
/disable] [/i]
Issue Date: 01/02/02