Interfacing To The Pr31500/Pr31700 - Epson S1D13505 Technical Manual

Page 8

2 Interfacing to the PR31500/PR31700

S1D13505
X23A-G-001-07
The Philips MIPS PR31500/PR31700 processor supports up to two PC Card (PCMCIA)
slots. It is through this host bus interface that the S1D13505 connects to the
PR31500/PR31700 processor.
The S1D13505 can be successfully interfaced using one of the following configurations:
• Direct connection to the PR31500/PR31700 (see Section 4, "Direct Connection to the
Philips PR31500/PR31700" on page 11).
• System design using the ITE IT8368E PC Card/GPIO buffer chip (see Section 5,
"System Design Using the IT8368E PC Card Buffer" on page 14).
Epson Research and Development
Interfacing to the Philips MIPS PR31500/PR31700 Processor
Vancouver Design Center
Issue Date: 01/02/05