Epson S1D13505 Technical Manual page 296

Page 6
Comments
S1D13505
X23A-B-002-05
• 13505SHOW cannot show a greater color depth than the display allows.
• Portrait mode is available only for 8, 15, and 16 bit-per-pixel.
• When using a PC with the S5U13505 evaluation board, the PC must not have more than 12M
bytes of system memory.
• 13505SHOW uses the panel color setup to determine whether to display a mono or color image
on both the panel and the CRT. When editing in 13505CFG with CRT enabled and panel
disabled, select "Color" from the "Panel" dialog box if you want the CRT to show color.
• For simultaneous display, select both "/lcd" and "/crt".
• If the "b=" option is not used, 13505SHOW will cycle through all available bit-per-pixel modes.
Epson Research and Development
Vancouver Design Center
13505SHOW Demonstration Program
Issue Date: 01/02/02