10/100/1000 Ports; Poe And Poe+ Ports - Cisco Catalyst 9200 Series Hardware Installation Manual

10/100/1000 Ports

1
2
3
4
Front Panel of a C9200 Switch
1
2
3
10/100/1000 Ports
The 10/100/1000 ports use RJ-45 connectors with Ethernet pinouts. The maximum cable length is 328 feet
(100 meters). The 100BASE-TX and 1000BASE-T traffic requires twisted pair (UTP) cable of Category 5
or higher. The 10BASE-T traffic can use Category 3 cable or higher.

PoE and PoE+ Ports

The PoE and PoE+ ports provide the following functionality:
• PoE/PoE+ ports: Support for IEEE 802.3af-compliant powered devices (up to 15.4W PoE per port) and
• Support for pre-standard Cisco powered devices.
• Configurable support for Cisco intelligent power management, including enhanced power negotiation,
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
4
Blue Beacon (UID button)
Mode button
Status LEDs
USB mini-Type B (console) port
Blue Beacon (UID button)
Mode button
USB mini-Type B (console)
port
support for IEEE 802.3at-compliant powered devices (up to 30W PoE+ per port).
power reservation, and per-port power policing.
5 USB Type A storage ports
6 10/100/1000 PoE+ ports
7 Fixed uplink ports
4 USB Type A storage ports
5 10/100/1000 PoE+ ports
6 Network Module with uplink
ports
Product Overview