Clear Arp Inspection Log; Defaults No Default Is Defined; This Command Has No Arguments Or Keywords - Cisco catalyst 3750 Command Reference Manual

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

clear arp inspection log

Use the clear ip arp inspection log privileged EXEC command on the switch stack or on a standalone
switch to clear the dynamic Address Resolution Protocol (ARP) inspection log buffer.
Syntax Description

This command has no arguments or keywords.

Defaults
No default is defined.
Command Modes
Privileged EXEC
Command History Release
12.2(20)SE
Examples
This example shows how to clear the contents of the log buffer:
Switch# clear ip arp inspection log
You can verify that the log was cleared by entering the show ip arp inspection log privileged command.
Related Commands Command
arp access-list
ip arp inspection log-buffer
ip arp inspection vlan
logging
show inventory
OL-8552-07
clear ip arp inspection log
Modification
This command was introduced.
log
Description
Defines an ARP access control list (ACL).
Configures the dynamic ARP inspection logging buffer.
Controls the type of packets that are logged per VLAN.
Displays the configuration and contents of the dynamic ARP
inspection log buffer.
Catalyst 3750 Switch Command Reference
clear arp inspection log
2-75