Cisco Catalyst 3850 Switch Database Manager Template; Sdm Template Resources: Vlan And Advanced - Cisco Catalyst 3850 Deployment Manual

The switch and wireless management IP address of the mobility controller switch is 20.1.3.2.
The switch and wireless management interface is VLAN 603.
The client VLAN that connects the mobility controller switch to the mobility agent switch is VLAN 500.
Note:
only the mobility controller definition is configured on the mobility agent switches. A complete configuration is in
Appendix B.
The SPG membership defined on the mobility controller does not change depending on whether the access
network between the mobility controller and mobility agent switches is Layer 2 or Layer 3.
Note:
Guide.

Cisco Catalyst 3850 Switch Database Manager Template

Cisco Catalyst 3850 switch database manager (SDM) templates allow configuring the hardware resources based
on the license level and features enabled in the switch. Two SDM templates are provided in the Cisco Catalyst
3850 Switch:
Advanced: This is the default template for all license levels. The advanced SDM template maximizes system
resources for advanced features such as NetFlow, security access control, flow SPAN, multicast groups, and more.
VLAN: This template is available only in the LAN base license level and is enabled when the Cisco Catalyst 3850
Switch is deployed as a Layer 2 switch. Wireless features will not work with this SDM template configuration.

SDM Template Resources: VLAN and Advanced

Table 1 details the resource allocation for VLAN and advanced SDM templates. These resource allocations are
based on L2 and IPv4 features. Because IPv6 features consume twice the ternary content addressable memory
(TCAM) table size of IPv4 table entries, the switch supports half the number of TCAM table entries for IPv6.
Table 1.
Resource
Number of VLANs
Unicast MAC addresses
Overflow unicast MAC addresses
IGMP and multicast groups
Overflow IGMP and multicast groups
Directly connected hosts
Indirect routes
Security access control entries
QoS access control entries
Policy-based routing ACEs
NetFlow ACEs
Flow SPAN ACEs
Tunnels
Control plane entries
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
The SPG definitions and the SPG membership are configured only on the mobility controller switch, and
Advanced converged access configurations are described in the Cisco Catalyst 3850 Switch Services
SDM Template Resource Allocation
Advanced
Template
4094
32768
512
8192
512
32768
8192
3072
2816
1280
1024
256
256
512
VLAN Resource Explained
Template
4094 Maximum number of VLANs
32768 Maximum number of unicast MAC addresses
512 Used when the maximum unicast MAC address limit is reached
8192 Maximum number of IGMP and multicast groups
512 Used when the maximum IGMP and multicast group limit is reached
32768 Maximum supported directly connected host routes
8192 Maximum supported indirect routes
3072 Maximum security ACEs
3072 Maximum QoS ACEs
0 Maximum PBR ACEs
1024 Maximum NetFlow ACEs
256 Maximum SPAN ACEs
0 Maximum CAPWAP tunnels
512 Internal software parameter
Page 42 of 54