Section 5 Running Starting Circuit - Baja WD250U Service Manual

Section 5 Running of Starting circuit
The starting circuit of this vehicle including
starting motor, cut-off relay, rear brake switch
and neutral switch. If the main switch is in
position, the starting motor could be operated
only at the following conditions:
• Driving device is in the neutral postion
(neutral switch is closed)
OR
• Rear brake switch (rear switch is closed)
When the vehicle is in drive or reverse, and
the rear brake is in idle, then the cut-off relay
will prevent starting device from running. In
this state the cut-off relay is closed.
When drive device is in neutral
When rear brake is tensioned
(1) Battery
(2) Start motor
(3) Start relay
(4) Cut-off relay
(5) Start switch
(6) Rear brake switch
(7) Neutral switch
[A] To main switch
[B] From main switch
124