Baja WD250U Service Manual page 103

7. Check the free clearance of left/right front
wheel fork
Inspection step:
a: Check the parts (1) of left/right front
wheel fork on the frame. If it is bent, cracked,
or worn, repair or replace the frame.
b: Check the torque value of locking nut (2)
on the left/right front wheel fork
Attached: Nut torque: 45Nm
c: Move the left/right front wheel fork from
one side to another to check it's side clearance.
If the side clearance is very obvious replace
bushing sub-assembly or a set of front wheel
fork.
d: Move the left/right front wheel fork up and
down to check its vertical clearance. If the
vertical moving is tight, limited, or uneven, re-
place the bushing sub-assembly or whole front
wheel fork.
8. Take off nut (1) , bolt (2) , left/right front
wheel fork (3) and bushing sub-assembly
(4) .
102