(Iii) Inspection Content - Baja WD250U Service Manual

(III) Inspection content

1. Check if the steering bar cracked, bent, or
damaged. If it is, replace it.
2. Inspect the steering vertical column welding
assy for any bends or damage. If there is, re-
place it.
WARNING:
In order to avoid decreasing the performance of
the steering vertical column, do not straighten it
forcefully if it is bent.
3. Inspection
Check the steering vertical column holder (1)
and seal ring (2) . If they are worn or damaged
replace them.
4. Inspection:
If the tension rod (1) is bent or damaged re-
place them.
5. Correcting:
If the free clearance is found on the ball pin
head, replace the ball pin. If the part around the
ball pin head is uneven, replace the ball pin.
If there is convex point, wear, or damage on the
core surface of ball pin end head, replace it.
95