Baja WD250U Service Manual page 222

1
1. Mount:
• Coil spring backboard assy
2
CAUTION:
Hang the coil spring hook hanger (2) into the
split of spring backboards, and wind the coil
spring in counterclockwise.
2. Install:
• Washer (1)
• Coil spring backboard assy (2)
CAUTION:
End of the coil spring is hung on the inner race
4
of left side–cover coil spring.
3
3. Wind the rope in the drive disc groove 4 ½
2
circles by clockwise.
1
4. Lubricate:
• Coil spring backboard assy
• Drive disc
1
4
5. Mount:
2
• Drive disc (1)
CAUTION:
The projection need to be mounted into two
hole groove (2) and the coil spring hook hang-
er also need to be mounted into the hole groove
(4) .
220