(Ii) Rear Fender - Baja WD250U Service Manual

3
5
8
9
4
1

(II) Rear fender

1. Disassembly
1- Place vehicle on level ground.
2- Disassemble the rear luggage carrier
(1) and installing bushing (2)
3- Disassemble the cushion (3) (see cush-
2
ion disassembly in this section).
4- Disconnect the negative wire (5) and
positive wire (4) of battery.
7
6
CAUTION:
Disconnect the negative wire (5) first.
5- Disassemble the clamp plate (9) of
battery.
6- Disassemble the starting relay (6)
7- Disassemble the cut-off realy (7)
8- Take out the battery (8)
9- Disassemble the rear fender (10)
10
38