CAUTION:
Don't loosen the nut after marking the standard
torque. If the recess on the nut does not cor-
respond with the split pin on the bolt, correct it
by fixing the nut.
WARNING:
Must use new split pin (3)
10. Mount front brake cap assy, brake shoe
assy, front brake hub, and front wheel.
Refer to "Installation of front wheel and front
brake" of this chapter.
11. Adjust front wheel toe-in
Refer to "Adjustment of front wheel toe-in" in
chapter.
12. Mount front fender, safety lever, and front
carrier.
Refer to the second section of chapter 2.
106