Baja WD250U Service Manual page 210

3) Washer C
Mount:
• Washer
• Reverse gear
• Special-shaped left-handed nut
CAUTION:
• The special-shaped left-handed nut
left-handed thread, so tighten it in counter
clockwise direction.
• Use special-shaped nut wrench
3
2
4) Washer D
Mount:
• Washer
• Bearing (2)
• Bushing (3)
CAUTION:
• Use inner allen bushing wrench
• Coat 518 anaerobic sealing gum or equal
substitute on outer end surface of bearing
(2) which side is near to washer.
208