(V) Inspection - Baja WD250U Service Manual

(V) Inspection

1. Replace the main driving gear and shift gear
if there are any caving, scratches, or wearing on
the gear teeth of bevel gear pair (1)
2. Check oil seal (2)
3. Check the O-ring (3)
Replace if damaged
4. Check the bearing (4)
Replace if damaged
CAUTION:
(a) The bearing can be used repeatedly;
however, the Jianshe group advises that it be
replaced. The oil seal should not be used repeat-
edly.
(b) Be sure to adjust the main driving gear
and/or shift gear when replacing them. Turn to
"Choice of Main Driving and Shift Gear Pad"
5. If the transmission shaft (5) (spline) has any
wear or damage, replace it.
6. If there are any cracks or damage on the driv-
ing gear case body (6) and cover (7) replace
them.
CAUTION:
Be sure to adjust the pad of main driving and
shift gear while replacing the driving gear case
body and cover. Turn to "Choice of Main Driv-
ing and Shift Gear Pad"
50
07
b
77