(Vi) Adjustment Of Speed Limiter - Baja WD250U Service Manual

(VI) Adjustment of speed limiter:

The speed limiter can limit the throttle in full open-
ing condition when the throttle grip is pulled to
the max position, screwing the adjuster inward can
stop increasing the speed.
1. Adjust speed limiting length (a)
Adjustment steps:
a. Loosen the locking nut (1)
b. Adjust the adjusting screw (2) clockwise or
counter-clockwise to make a obtain the specified
length of 12mm.
c. Lock the locking nut (1)
1 2
WARNING:
a. For the beginner driver, pay extra attention to
screw the limiter inward and screw out with im-
provement of driving skills. Never remove the
adjusting screw of speed limitor.
b. For the correct throttle grip operation, never
screw out the adjuster to exceed 12mm, and adjust
the free clearance of throttle grip to 3-5mm.
62