(Iii) Replacement Of Headlight Lamp - Baja WD250U Service Manual

1 2. Replacement of bad/old fuse
Replacement steps:
• Cut off engine and circuit
• Install the new fuse.
• Start the power for electrical appliance inspection.
• If the fuse is not responding check the system
again (Refer to "Electrical Appliance" of chapter 4)
3. Installment of fuse cover

(III) Replacement of headlight lamp

1. Cut off engine
• Connecting wire terminal of headlight (1)
2. Removal
• Unit of headlight (2)
3. Take out the lens (1)
4. Remove the lens seat (2)
2
Rotate countereclockwise when taking out the lens
(1) .
CAUTION:
When removing the light head hold the front side
of the headlight with hand.
5. Removal:
• Lamp (1)
WARNING:
The lamp is very hot never touch before cooling.
56