Baja WD250U Service Manual page 151

23. Remove
• Main clutch nut (2)
CAUTION:
Loosen the locking pad (1) before removing
the nut, and fix the main clutch shoe (3), then
remove the nut.
24. Remove
• Locking pad (1)
1
• Main clutch shoe unit (2)
3
5
2
4
• Washer (3)
• Main clutch housing unit (4)
• Washer (5)
1
CAUTION:
The two grooves (1) on auxiliary clutch
when installing the main drive gear (2) .
So when removing the main clutch unit, you
must aim any one of the two grooves at the
main driving gear firstly.
2
25. Remove:
• Nut (1)
• Output gear (2)
2
CAUTION:
1
• Slap flat the self-locking part of the nut
• Place the engine to 1st gear to operate
• When loosening the nut (output gear), must
fix the auxiliary hub assy (4) with special
tool.
26. Remove
4
3
• Clutch post rod (1)
2 1
• Bearing (2)
• Compressing cover (3)
• Clutch spring (4)
150