Baja WD250U Service Manual page 232

• Improper installation of steering
pillar bearings
• Holding seat of steering pillar or
sealing ring is damaged
• Rod is bent
• Spherical connection is bent
(3) Wheel tire
• Uneven pressure on two sides of tire
• Wrong tire pressure
• Uneven tire wear
(4) Front/ Rear tire
• Deformed rim
• Loosen bearing front wheel axle is
bent or loosen
• Radial run out of front/rear wheel is
too big
(5) Frame
• Bend
• Damaged frame
(6) Rear wheel fork
• Bearing is bushing or worn
• Rear wheel fork is bent or damaged
(X) Lighting System
1. Head light is out of work
• Bulb is trouble
• Too big load
• Charging difficulty (Lighting coiler
rectifier is failure)
• Wrong connection of wire
• Wrong connection of ground
• Poor connection (Main switch or
lighting switch)
• Use-life of belt is end
2. Bulb is off
• Bulb is out of specification
• Battery fails
• Rectifier fails
• Wrong connection of ground
• Main switch or lighting switch fail
• Use-life of bulb is end
230