Baja WD250U Service Manual page 90

5. Installment
Cam shaft of rear brake (1)
Indicating plate of brake (2)
Rear brake arm assy (3)
CAUTION:
When installing the brake indicating plate (2)
to rear brake cam shaft (1) , be sure to align
the projective part (a) of brake indicating
plate (2) with the concave part (b) of rear
brake cam shaft (1) .
At the same time, align the punch mark (c)
on the rear brake cam shaft with that (d) of
the rear brake arm assy (3) .
The torque of rear arm assy; 9Nm
6. Application
Sealing agent: Be suitable for the rear brake
cover assy and rear wheel axle bushing sur-
face.
Attached: Sealing agent: P/N: ACC-QUICK-
GS-KT
7. Installment
Rear brake cover assy (1)
Bearing block of rear brake (2)
CAUTION:
Install the rear brake cover with bolt (3) , the
torque of bolt installment is: 28N·m۪
89