Baja WD250U Service Manual page 157

47. Remove
4
• Coiling spring (1)
3
•Coiling spring backboard (2)
• Driving plate assy (3)
• Left side cover assy (4)
1
48. Remove
2
• Pressure plate (1)
CAUTION:
• Remove the screw with impact
screwdriver
49. Remove
• Bearing (1)
• Washer (2)
50. Remove
• Circlip (1)
• Rear joint (2)
CAUTION:
The disassembling method of rear joint is as
follows:
• Pull and press the driving fork downward
• Use a sleeve with the proper diameter below
the front joint, and press the bearing into the
sleeve as shown in figure.
• Repeat the procedure to corresponding bearing
• Remove the driving fork and rear joint (2)
156