Baja WD250U Service Manual page 203

1
1
3
2
3
2
2
4
4
5
1
7. Electric starting system
1) Mount:
• Timing chain (1)
• Up guide plate (2)
CAUTION:
Tighten the shaft wire of timing chain to avoid
dropping it into the crankcase.
2) Mount:
• Washer (1)
• Electric Starting gear assy (2)
• Woodruff key (3)
• Magnets rotor (4)
CAUTION:
• Clean the conical part of crank and magneto
• When installing the magneto key must be in
the key groove of crank for avoiding it.
• Mount the magneto (4) drops out on the
crank, and then fix the electric starting gear
assy (2) turn the magneto by counterclock-
wise to make it into the electric starting big
gear
3) Mount:
• Double wheel (1)
• Washer
• Wheel axle (3)
• Locating pin (4)
• Sealing washer (5) of left crankcase cover
CAUTION:
Must use new washer
202