Baja WD250U Service Manual page 89

(III) Installment steps:
The reversal steps of "removal steps" are in-
stallment steps. Pay attention to the following
points when installing:
1. Lubrication part
(1) Oil seal lip of rear wheel axle.
(2) Bearing of rear wheel axle.
The corresponding splint tooth of rear wheel
axle.
The lubrication oil is lithium base grease.
2. Installment
Installment of rear wheel axle (1)
CAUTION:
Before installing the rear wheel axle, loosen
all bolts on the driving gear case (2) ; hold
the rear wheel axle with hand to make it enter
the gear groove of gear case, apply on the left
end of the axle slightly with soft hummer.
WARNING:
In order to protect the axle thread and splint
tooth of axle, never beat the end face of axle
directly with hummer.
3. Installment
Plain pad of rear brake cover
O-ring 30x1.8G
4. Lubrication of rear brake cam shaft.
The lubrication oil is lithium base grease.
88