(Iv) Disassembly - Baja WD250U Service Manual

(IV) Disassembly

WARNING:
Ensure that the vehicle does not turn over by
firmly supporting it.
1. Drain the rear driving gear case oil
Refer to section 3, chapter 2, "Replacement of
engine oil of rear driving gear case"
2. Disassemble
1) Cushion
2) Rear luggage carrier
3) Rear fender
1
2 Refer to "rear fender"
3. Disassemble
1) Rear wheel (left)
2) Connecting plate of rear wheel
3) Rear wheel (right)
4) Rear brake and rear brake hub
5) Rear wheel shaft
Refer to "Rear wheel/rear brake/rear wheel
shaft"
4. Disconnect:
Air pipe (1) (rear driving gear case)
5. Disassemble
Rear driving gear case body (2)
CAUTION:
1) The transmission shaft (3) could possibly
drop out while driving gear case is removed
from the rear wheel fork.
2) Do not lose these components.
74