Baja WD250U Service Manual page 226

7. Fasten:
• Bolt (1)
(Installation position of engine -- rear lower)
• Bolt (2)
(Installation position of engine -- rear lower)
• Bolt (3)
(Installation position of engine -- front)
• Bolt (4)
(Installation position of engine -- top)
• Coupling bolt of rear arm (5)
(Rear arm shaft -- left)
• Coupling bolt of rear arm (6)
(rear arm shaft -- right)
• Rear arm nut (7)
Bolt (Installation position of engine -- rear lower)
33Nm(3.3m*bg*24ft*lb)
Bolt (Installation position of engine -- rear lower)
33Nm(3.3m*bg*24ft*lb)
Bolt (Installation position of engine --front)
48Nm(4.8m*bg*35ft*lb)
Bolt (Installation position of engine -- top)
33Nm(3.3m*bg*24ft*lb)
Coupling bolt of rear arm (rear arm shaft – left)
130Nm(13m*bg*94ft*lb)
Coupling bolt of rear arm (rear arm shaft – right)
0.6Nm(0.6m*bg*4.3ft*lb)
Rear arm nut:
130Nm(13m*bg*94ft*lb)
Bolt (rear shock absorber – top):
50Nm(5.0m*bg*36ft*lb)
8. Mount:
• Dust cap (9) of rear arm shaft
9. Connect:
• Breather tube (1) (rear drive)
Refer to "Diagram of vehicle" in section 6 of
chapter 1
224