(Iii) Adjustment Of Free Clearance Of Left Lever And Rear Brake Pedal - Baja WD250U Service Manual

1
2
2. Adjustment
Adjusting procedure of the free clearance of
right lever:
• Loosen the lock nut (1) , rotate the cable
adjusting screw (2) clockwise to reduce the
tension of front brake cable.
• Lift the front end from the ground, rotate the
two front wheels. Apply brake to verify it is
adjusted correctly.
• Rotate the adjusting screw (2) clockwise
or counterclocksiwe to gain proper free clear-
ance.
Clockwise: wear free clearance
Counterclockwise: decrease free
clearance
• Tighten the lock nut
(III) Adjustment of free clearance of left lever
and rear brake pedal.
CAUTION:
Before adjusting, check the wear condition of
rear brake.
CAUTION:
In order to avoid too large or too small brake
force of rear brake.
WARNING:
When braking after adjusting, must adjust the
left lever and rear brake pedal simultaneously.
45