(Ii) Removal Steps Of Steering Vertical Column Welding - Baja WD250U Service Manual

(II) Removal steps of steering vertical column
welding
1. Plain move
(1) The locking part of locking pad as shown
2. Removal
(2) Bolt M8x60
(3) Locking washer
(4) Clip assy
3. Removal
Install the steering vertical column with split pin
2.5x24
Nut M10
Washer 10
4. Removal
Split pin 3.2x24
Nut M12x1.25
1
Tension rod (1)
CAUTION:
When removing the tension rod end and steering
ball pin from the steering vertical column weld-
ing assy and front seat assy of front brake with
common bearing tension tool and other tools,
pay attention not to damage the relevant parts.
5. Removal
Remove the steering vertical column weld-
ing assy together with steering vertical column
holder.
6. Removal
(1) Steering vertical column holder
(2) Bushing
(3) Oil seal
94