Baja WD250U Service Manual page 220

1
3
1
20. Mount:
• Valve cover (1) (mount o-ring in the sealing
groove of throttle cover first)
2
• Valve cover (2) (mount o-ring in the sealing
groove of throttle cover first)
• Spark plug (3)
CAUTION:
Check the o-ring. If it is deformed or damaged,
replace it.
21. Mount:
• Sprocket chamber cover (1) (mount o-ring in
the sealing groove of sprocket chamber cover
first).
CAUTION:
Check the o-ring. If it is deformed or damaged,
replace it.
22. Mount:
• O-ring
• Carburetor seat
• Washer
• Carburetor Mount o-ring in sealing groove
first).
CAUTION:
Check the o-ring. If it is damaged, replace it.
23. Mount:
• Carburetor seat and carburetor (on cylinder
cover)
• Wire clamp
CAUTION:
The carburetor seat and the o-ring in the sealing
groove of the cylinder cover connecting surface
can't be forgotten to mount.
218