1
(VII) Adjustment of valve clearance
CAUTION:
The valve clearance should be adjusted only after
the engine is cold, the valve clearance should be
adjusted when the piston is at the end point posi-
tion of compress stroke.
1. Removal:
1) Rest the vehicle on level ground
2) Remove
a. Cushion (Refer to section 2 "Cushion removal"
of this chapter)
b. Fuel tank (Refer to section 2 "Fuel tank remov-
al" of this chapter)
3) Remove:
2
a. Timing observation hole scsrew (1)
b. Manual operation start mechanism (2)
4) Remove:
a. Valve cap (1) (the side of exhaust valve)
2
1
b. Valve cap (2) (the side of intake valve)
2. Adjustment
1) Measure the valve clearance
a. Turn the crankshaft counterclockwise with
wrench.
63